Sun Microsystems 6.0005E+11 manual Post

12

DC power (green)

Fault (yellow)

System running

(green)

Figure 12-9Front Panel Status LEDs (Standalone Server)

Table 12-1 summarizes the front panel LED status conditions during and after

POST.

	Table 12-1	LED Status Indicators
Location	LED	Condition
Front panel	Left/Top LED	On — DC power supply is receiving AC current.
	(green)	Off — There is no DC power.
	Middle LED	On flashing— (first 60 seconds) Self tests are running.
	(yellow)	Off — (after self tests end) No hardware failures.
		On — (after self tests end) Hardware failure was detected.
	Right/Bottom	Off — (first 60 seconds) Self tests are running.
	LED (green)	On flashing— (after self tests end) System is running.
		Off — (after self tests end) System cannot run; repair is needed.

Powering Off and On 12-11