
12
12.3.5 Rear Screen Panel
To remove the rear screen panel:
1.Remove the two #10 Phillips screws securing the panel to the frame. See Figure
2.Tilt the panel top out and lift it free of the chassis. Set the panel aside. There is a flange on the bottom of the rear screen.
#10 Phillips screws
Kick panel
Figure 12-3 Removing the Rear Screen Panel
Note – If your cabinet has a hinged rear door, remove the pins from the hinges and lift the door free of the chassis. Reverse this procedure to replace the door.
To replace the rear screen panel:
1.Insert the panel so the bottom flange engages behind the top of the kick panel.
2.Tilt the panel flush against the frame and secure using Phillips screws.
Ultra Enterprise 6000/5000/4000 Systems |