3

4.Eject the faulty SIMM by pressing down on the ejection levers on both sides of the SIMM connector.

See Figure 3-14.

Figure 3-14Ejecting a SIMM

5.Holding the SIMM by its edges, remove it from the slot and place it on an antistatic surface.

3.4.5.2Installing a Memory Module

Requirements

All banks must have the same size SIMMs, however, SIMMs from different manufactures are interchangeable in a single bank if the SIMMs all have the same capacity and speed. Sort the SIMMs into banks of 8 using the same size SIMMs.

CPU/Memory Boards and Components

3-21

Page 69
Image 69
Sun Microsystems 6.0005E+11 manual Installing a Memory Module, Requirements