3
Note – All empty board slots in Enterprise 4000 or 5000 systems must have a filler panel installed to ensure proper cooling. All empty slots in Enterprise 6000 systems must have load boards installed.
3.4.2.3Powered or NonPowered On System
1.Carefully insert the board (component side down if in front; component side up if in the rear) in the proper slot in the card cage, ensuring that the board does not slip out of the left and right card guides.
See Figure 3-8.
Board orientation for insertion in the cabinet rear (component side up)
Figure 3-8 Board Replacement
Board orientation for insertion in the cabinet front (component side down)
Ultra Enterprise 6000/5000/4000 Systems |
