12 
Note – POST does not test drives or internal parts of SBus cards. To test these devices, run OBP diagnostics manually after the system has booted. Refer to the OpenBoot Command Reference manual for instructions.
7.To start POST again, or if the system hangs, press the CPU reset switch on the clock board.
See Figure 12-7.
System reset switch
CPU
reset switch
Figure 12-7 CPU Reset Switch on Clock Board
8.If the system displays “not responding” or “no carrier” messages, the Link Integrity Test may be set incorrectly. See “Link Integrity Test” on page
Powering Off and On |
