Sun Microsystems 6.0005E+11 manual SBus Cards

3

This screen output indicates that the board has been detected by the system and is in the low power mode. Additionally, any subsequent prtdiag(1M) output would include information for board slot 6. Again, note that the system will not use the new board until the system is rebooted.

8.Reboot the system now or schedule a later time to reboot when system disruption will be minimized.

3.5.4SBus Cards

There are three SBus card locations on the SBus I/O board; the Graphics I/O board has two. Figure 3-13 shows the SBus card locations for both types of boards.

I/O Boards and Components 3-19