Sun Microsystems 6.0005E+11 manual 4Removing the Side Panels

12

12.3.6 Side Panels

To remove the left and right side panels:

1.Loosen two slot-head captive screws near the panel base.

2.Tilt the panel bottom out.

3.Lift the panel up until free of the tabs at the top of the chassis. Set the panel aside.

Panel notches

Chassis tabs

Side panel

Captive screws

Figure 12-4Removing the Side Panels

To replace the side panels:

1.Place the panel against the cabinet so the notches on the panel inside align with tabs at the chassis top.

2.Lower the panel into place and allow it to hang flush against the chassis.

3.Tighten the two captive screws at the panel base.

Preparing for Service 12-7