If you select V-NOTCH, the following will appear

Section 2 Programming

If you select V-NOTCH, the following will appear:

SELECT V-NOTCH WEIR ANGLE (IN DEGREES)

• 22.5 • • 30 • • 45 • • 60 • • 90 • • 120 •

If you select RECTANGULAR, the following will appear:

END CONTRACTIONS ON RECTANGULAR WEIR:

• YES • • NO •

If you select YES, the following will appear:

RECTANGULAR WEIR WITH END CONTRACTIONS

ENTER CREST LENGTH XX.XXX FEET (or meters)

If you select CIPOLLETTI, the following will appear:

CIPOLLETTI WEIR

ENTER CREST LENGTH XX.XXX FEET (or meters)

If you selected FLUME for the type of standard device, the fol- lowing display will appear:

SELECT TYPE OF FLUME

• PARSHALL • • PALMER-BOWLUS • • LEOPOLD-LAGCO •

Also available with the arrow key:

SELECT TYPE OF FLUME

• HS • • H • • HL • • TRAPEZOIDAL •

If you select PARSHALL, the following will appear:

SELECT PARSHALL SIZE:

• 1" • • 2" • • 3" • • 6" • • 9" • • 1.0' • • 1.5' • • 2.0' •

If you press the right arrow key several times, the sizes shown below will move onto the screen:

SELECT PARSHALL SIZE:

• 3' • • 4' • • 5' • • 6' • • 8' • • 10' • • 12' •

If you select PALMER-BOWLUS, this will appear:

SELECT PALMER-BOWLUS SIZE

• 4" • • 6" • • 8" • • 9" • • 10" • • 12" • • 15" • • 18" • • 21" •

If you press the right arrow key several times, the sizes shown below will move onto the screen:

SELECT PALMER-BOWLUS SIZE

• 24" • • 27" • • 30" • • 48" •

2-30