4220 Flow Meter
Section 2 Programming
If you select any of these outputs, the flow meter will request that you turn them on or off. If you are running on battery and do not intend to use either of these options, select OFF. Otherwise, select ON. After the OPTIONAL OUTPUTS menus have been set, press Enter. The display will return to the SETUP menu.
This time, select REPORT SETUP with the arrow key. Press Enter.
REPORT SETUP
• REPORT A • • REPORT B •
This step lets you determine the contents of the reports gen- erated by the flow meter. The flow meter's report generator is capable of creating two different reports (A and B) that can be identical or quite different. The reason for two reports is to allow the summary of flow meter recording over different time periods. For example you might generate report A weekly, and report B monthly. At this point we are only interested in selecting the items the flow meter will include in each report. Press Enter and the following will appear:
REPORT SETUP
• FLOW • • DO/PH • •YSI 600 • • SAMPLE HISTORY •
FLOW METER HISTORY is just off the screen, to the right. If you select FLOW and press Enter, the following will appear:
LEVEL IN REPORT
• YES • • NO •
Select YES if you want LEVEL to appear in the report, then press Enter. The following will appear:
FLOW RATE IN REPORT
• YES • • NO •
Select YES if you want FLOW RATE to appear in the report, then press Enter again. Then:
RAINFALL IN REPORT
• YES • • NO •
Select YES if you want RAINFALL to appear in the report. Note that you must have a rain gauge connected to the flow meter to sense rainfall occurrence. Press Enter. The following will appear:
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
FLOW METER HISTORY is off the screen to the right. Select DO/PH. Press Enter. The following will appear:
PH OR DO IN REPORT
• YES • • NO •
