Teledyne 4220 Understood. While specific hazards may vary according to

	4220 Flow Meter
	Safety
General Warnings	Before installing, operating, or maintaining this equipment, it is
	imperative that all hazards and preventive measures are fully
	understood. While specific hazards may vary according to
	location and application, take heed in the following general
	warnings:
	WARNING
	Liquids associated with this instrument may be classified
	as carcinogenic, biohazard, flammable, or radioactive.
	Should these liquids be used, it is highly recommended that
	this application be accomplished in an isolated
	environment designed for these types of materials in
	accordance with federal, state, and local regulatory laws,
	and in compliance with your company’s chemical/hygiene
	plan in the event of a spill.
	WARNING
	Avoid hazardous practices! If you use this instrument in
	any way not specified in this manual, the protection
	provided by the instrument may be impaired.
	WARNING
	If this system uses flammable organic solvents, Isco
	recommends that you place this system in a well-ventilated
	environment, designed for these types of materials. This
	environment should be constructed in accordance with
	federal, state, and local regulations. It should also comply
	with your organization’s plan concerning chemical and
	hygiene mishaps. In all cases use good laboratory
	practices and standard safety procedures.
Hazard Severity Levels	This manual applies Hazard Severity Levels to the safety alerts,
	These three levels are described in the sample alerts below.
	CAUTION
	Cautions identify a potential hazard, which if not avoided, may
	result in minor or moderate injury. This category can also warn
	you of unsafe practices, or conditions that may cause property
	damage.
	WARNING

Warnings identify a potentially hazardous condition, which if not avoided, could result in death or serious injury.