TI-83 Plus Sequence Graphing 185
Setting Window Variables
To display the window variables, press p. These variables define
the viewing window. The values below are defaults for Seq graphing in
both Radian and Degree angle modes.
nMin=1 Smallest
n
value to evaluate
nMax=10 Largest
n
value to evaluate
PlotStart=1First term number to be plotted
PlotStep=1Incremental
n
value (for graphing only)
Xmin=L10 Smallest X value to be displayed
Xmax=10 Largest X value to be displayed
Xscl=1Spacing between the X tick marks
Ymin=L10 Smallest Y value to be displayed
Ymax=10 Largest Y value to be displayed
Yscl=1Spacing between the Y tick marks
n
Min must be an integer ‚ 0.
n
Max, PlotStart, and PlotStep must be
integers ‚ 1.
n
Min is the smallest
n
value to evaluate.
n
Min also is displayed in the
sequence Y= editor.
n
Max is the largest
n
value to evaluate. Sequences
are evaluated at u(
n
Min), u(
n
Min+1), u(
n
Min+2) , . . . , u(
n
Max).