TI-83 Plus Communication Link 642
Note: You cannot perform a memory backup from a TI-83 Plus to a TI-82 or
from a TI-82 to a TI-83 Plus.
To send lists to a TI-82:
1. Use a unit-to-unit cable to link the two units together.
2. Set the TI-82 to receive.
3. Press
y 8 5 on the sending TI-83 Plus to select 5:Lists to TI82.
The SELECT screen is displayed.
4. Select each list to transmit.
5. Press
~ to display the LINK TRANSMIT menu.
6. Confirm that the receiving unit is set to receive.
7. Press
Í to select 1:Transmit and begin transmitting.
Sending to a TI-73
You can send real numbers, pics, real lists L1 through L6, and named
lists from a TI-73 to a TI-83 Plus or from a TI-83 Plus to a TI-73.
Since the Theta symbol (q) is not recognized by the TI-73, you cannot
include this symbol in any list names sent to the TI-73.