TI-83 Plus Operating the TI-83 Plus Silver Edition 20
Changing Mode Settings
To change mode settings, follow these steps.
1. Press † or } to move the cursor to the line of the setting that you
want to change.
2. Press ~ or | to move the cursor to the setting you want.
3. Press Í.
Setting a Mode from a Program
You can set a mode from a program by entering the name of the mode
as an instruction; for example, Func or Float. From a blank program
command line, select the mode setting from the mode screen; the
instruction is pasted to the cursor location.
Normal, Sci, Eng
Notation modes only affect the way an answer is displayed on the home
screen. Numeric answers can be displayed with up to 10 digits and a
two-digit exponent. You can enter a number in any format.