Xerox 4260 Series manual Click on Printer Add Remote Unix, Printer name of the queue being created

Unix

Configure the Client

1.Add the machine printer hostname to the etc/hosts file on the SCO workstation.

2.Ensure that you can Ping the machine from the SCO workstation.

Perform the following steps to create a machine print queue on a SCO UNIX workstation using either the GUI or the TTY method.

GUI Method

1.Log in as root.

2.From the main desktop, select the icons [System Administration: Printers: Printer Manager].

3.Click on [Printer: Add Remote: UNIX...].

4.Enter the following information into the [Add Remote UNIX Printer] form:

a)Host: hostname.

Where hostname is the machine Host Name from the /etc/hosts file.

b)Printer: name of the queue being created.

For example: dc xxxq.

c)Click on [OK] to complete the form.

5.Click on [OK] in the [Message] window.

6.Click on [Host:Exit].

7.Click on [File: Close this directory].

8.Click on [File: Close this directory].

9.Click on [Save] in the [Warning Confirmation] window.

10.Enter Exit to log out of root account.

11.Open Unix Window.

tty Method

1.Enter su to access Super User mode.

2.Enter rlpconf to create a printer.

3.Enter the following information:

a)Printer Name: queuename

b)Remote Printer: r

c)Hostname: hostname

d)If the information has been entered correctly, enter y

4.Click on [Enter] to accept the default for a non-SCO remote printer.

5.Click on [Enter] to accept the default for non-default printer.

6.Click on [Enter] to start the process for adding a queue.

7.Enter q to quit the rlconf program.

Xerox WorkCentre 4260 Series System Administration Guide 29