Xerox P12 manual Printer Status Definition/Cause Action

Printer Status	Definition/Cause	Action
Page too	If the Auto-continueis checked and the	If the image still does not look
complex/Memory	15 seconds time-out value is expired, the	good, you may want to install
overflow	printer continues with the print job.	an optional RAM SIMM to your
(continues)	If the Auto-continueis off or the 15	printer.
	seconds time-out value has not expired,
	the printer will suspend all print jobs until
	the control panel button is pressed.
Post printing	This status occurs when the printer
paper size error	detects a printing paper size which does
	not match the size of data received by the
	printer while printing. Lights are on as
	soon as this state is detected and as long
	as it takes the printer to process the data.
	This can occur when MBF is used for a
	source, or if the incorrect paper size has
	been loaded into 250-sheet or 500-sheet
	paper cassette.
	If the Auto-continueis checked and the
	15 seconds time-out value has expired,
	the printer continues the print job.
	If the Auto-continueis off or the	The printer operator should set
	standard 15 seconds time-out value has
	not expired yet, the printer will suspend all	the correct paper size into the
	print job.	paper cassette and press the
		control panel button.
Lower resolution	When Adobe Memory Booster technology	16 MB DRAM Memory
used	is used and the resolution of the page	upgrade is recommended.
	image appears degraded, this status will
	be indicated as soon as the state is
	detected and as long as it takes the
	printer to process the job.
	If the Auto-continueis checked and the
	15 seconds time-out value is expired, the
	printer continues with the print job.

Control Panel • 59