2-3 Testing the Printer
2-3-1 Switching on the printer
Press the power switch to the [I] position to turn on the printer.
When the Online LED is on, the printer is ready to print.
If an error occurs, check that:
•the top cover is properly closed;
•the Laser Printer cartridge is properly installed;
☞
•there is no paper inside the printer.
2-3-2 Test printing
After installation, you may want to run a simple test on your printer by printing out documents. Xerox DocuPrint P12 provides three ways for you to test the printer. Before you print, remember to load paper into the paper cassette.
☞
Prints settings page via the control panel
When the Online LED is on, hold down the control panel button for 10 seconds, the printer will print a settings page showing the printer’s parameters. If the network interface card (one of the hardware options) is installed, settings page for the Network will also be printed.
