Xerox P12 Installing software in DOS environment, installing. ex. d\win95\disk1\xcp12.Inf, Enter

3	Click Have Disk. When the Install From Disk dialog box is
	displayed, click the Browse button. From there, select CD-
	ROM Drive, followed by \DOCPRNT\WIN95\XCP12.INF to start
	installing. (ex. d:\win95\disk1\xcp12.Inf)

During installation, you may have to copy files to your hard disk. When you are installing the software, it is recommended that you follow the disk space requirements specified below.

Windows 95

Driver only	917K
Status Monitor only	1,333K
DOS Utilities only	490K

2-2-5 Installing software in DOS environment

If you are operating in a DOS-only environment, you can manually install the DOS utility files stored in both the Windows 95 Setup Disk and Windows 3.1x Setup Disk. Follow the procedures described below.

1

2

3

Start up your host PC.

When you see the DOS prompt C:\>, insert either Windows 95 Setup Disk or Windows 3.1x Setup Disk into the 3.5-inch drive.

Change to the DOS directory by typing cd c:\DOS and press

Enter.

4	Copy the DOS program files XC12SM.EXE, XC12CP.EXE and
	XC12CP.HLP from the Setup disk in your 3.5” drive to your

hard disk drive by following the steps below.

Type copy a:\XC12SM.EXE and press Enter

Type copy a:\XC12CP.EXE and press Enter

Type copy a:\XC12CP.HLP and press Enter

26 • Chapter 2