Chapter 4 Tutorial
Figure 73 Tutorial Example: Bandwidth Management Summary
7Click the Class Setup tab.
8Select the WAN1 interface and click the Add
Figure 74 Tutorial Example: Bandwidth Management Class Setup
9Enter a descriptive name (“WAN1_VoIP” for example), the maximum bandwidth allowed and a priority for VoIP traffic. The higher the number, the higher the priority.
10Enable this filter and select the SIP service. Make sure you also use the ALG screen to turn on the SIP ALG.
11Leave the IP address and subnet mask fields blank, so that the filter will be applied to any outgoing traffic through the WAN port. Click Apply.
130 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|