46

IP Policy Routing

This chapter covers setting and applying policies used for IP routing.

46.1 IP Routing Policy Summary

Menu 25 shows the summary of a policy rule, including the criteria and the action of a single policy, and whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the incoming packet and the latter is the action. Between these two parts, separator "" means the action is taken on criteria matched and separator "=" means the action is taken on criteria not matched.

Figure 456 Menu 25: Sample IP Routing Policy Summary

Menu 25 - IP Routing Policy Summary

# A

Criteria/Action

---- -------------------------------------------------------

001 N SA=1.1.1.1-1.1.1.1 DA=2.2.2.2-2.2.2.5

002

SP=20-25 DP=20-25 P=6 T=NM PR=0

GW=192.168.1.1 T=MT PR=0

N _______________________________________________________

003

_______________________________________________________

N _______________________________________________________

004

_______________________________________________________

N _______________________________________________________

005

_______________________________________________________

N _______________________________________________________

006

_______________________________________________________

N _______________________________________________________

 

_______________________________________________________

 

Select Command= None

Select Rule= N/A

 

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

The following table describes the fields in this screen.

Table 248 Menu 25: Sample IP Routing Policy Summary

FIELD

DESCRIPTION

#

This is the policy index number.

 

 

A

This displays whether a policy is active (Y) or not (N).

 

 

 

673

ZyWALL 2WG User’s Guide