Chapter 3 Wizard Setup

The following table describes the labels in this screen.

Table 19 VPN Wizard: IPSec Setting

LABEL

DESCRIPTION

Encapsulation Mode

Tunnel is compatible with NAT, Transport is not.

 

Tunnel mode encapsulates the entire IP packet to transmit it securely. A Tunnel

 

mode is required for gateway services to provide access to internal systems.

 

Tunnel mode is fundamentally an IP tunnel with authentication and encryption.

 

Transport mode is used to protect upper layer protocols and only affects the

 

data in the IP packet. In Transport mode, the IP packet contains the security

 

protocol (AH or ESP) located after the original IP header and options, but before

 

any upper layer protocols contained in the packet (such as TCP and UDP).

 

 

IPSec Protocol

Select the security protocols used for an SA.

 

Both AH and ESP increase ZyWALL processing requirements and

 

communications latency (delay).

 

 

Encryption Algorithm

When DES is used for data communications, both sender and receiver must

 

know the same secret key, which can be used to encrypt and decrypt the

 

message or to generate and verify a message authentication code. The DES

 

encryption algorithm uses a 56-bit key. Triple DES (3DES) is a variation on DES

 

that uses a 168-bit key. As a result, 3DES is more secure than DES. It also

 

requires more processing power, resulting in increased latency and decreased

 

throughput. This implementation of AES uses a 128-bit key. AES is faster than

 

3DES. Select NULL to set up a tunnel without encryption. When you select

 

NULL, you do not enter an encryption key.

Authentication

MD5 (Message Digest 5) and SHA1 (Secure Hash Algorithm) are hash

Algorithm

algorithms used to authenticate packet data. The SHA1 algorithm is generally

 

considered stronger than MD5, but is slower. Select MD5 for minimal security

 

and SHA-1for maximum security.

 

 

SA Life Time

Define the length of time before an IKE SA automatically renegotiates in this

(Seconds)

field. The minimum value is 180 seconds.

 

A short SA Life Time increases security by forcing the two VPN gateways to

 

update the encryption and authentication keys. However, every time the VPN

 

tunnel renegotiates, all users accessing remote resources are temporarily

 

disconnected.

 

 

Perfect Forward

Perfect Forward Secret (PFS) is disabled (None) by default in phase 2 IPSec

Secret (PFS)

SA setup. This allows faster IPSec setup, but is not so secure.

 

Select DH1 or DH2 to enable PFS. DH1 refers to Diffie-Hellman Group 1 a 768

 

bit random number. DH2 refers to Diffie-Hellman Group 2 a 1024 bit (1Kb)

 

random number (more secure, yet slower).

 

 

Back

Click Back to return to the previous screen.

 

 

Next

Click Next to continue.

 

 

3.7 VPN Wizard Status Summary

This read-only screen shows the status of the current VPN setting. Use the summary table to check whether what you have configured is correct.

96

 

ZyWALL 2WG User’s Guide