ZyXEL Communications 2WG 26.5 Log Descriptions, 26.4.4 System Reports Specifications

Chapter 26 Logs Screens

The following table lists detailed specifications on the reports feature.

Table 162 Report Specifications

LABEL	DESCRIPTION
Number of web	20
sites/protocols
or ports/IP
addresses
listed:

Hit count limit:	Up to 232 hits can be counted per web site. The count starts over at 0 if it passes
	four billion.

Bytes count	Up to 264 bytes can be counted per protocol/port or LAN IP address. The count
limit:	starts over at 0 if it passes 264 bytes.

This section provides descriptions of example log messages.

Table 163 System Maintenance Logs

LOG MESSAGE	DESCRIPTION
Time calibration is	The router has adjusted its time based on information from
successful	the time server.
Time calibration failed	The router failed to get information from the time server.
WAN interface gets IP: %s	A WAN interface got a new IP address from the DHCP,
	PPPoE, PPTP or dial-up server.
DHCP client IP expired	A DHCP client's IP address has expired.
DHCP server assigns %s	The DHCP server assigned an IP address to a client.
Successful SMT login	Someone has logged on to the router's SMT interface.
SMT login failed	Someone has failed to log on to the router's SMT interface.
Successful WEB login	Someone has logged on to the router's web configurator
	interface.
WEB login failed	Someone has failed to log on to the router's web configurator
	interface.
Successful TELNET login	Someone has logged on to the router via telnet.
TELNET login failed	Someone has failed to log on to the router via telnet.
Successful FTP login	Someone has logged on to the router via FTP.
FTP login failed	Someone has failed to log on to the router via FTP.
NAT Session Table is Full!	The maximum number of NAT session table entries has been
	exceeded and the table is full.
Starting Connectivity	Starting Connectivity Monitor.
Monitor
Time initialized by Daytime	The router got the time and date from the Daytime server.
Server
Time initialized by Time	The router got the time and date from the time server.
server