Chapter 6 LAN Screens
Figure 94 NETWORK > LAN
The following table describes the labels in this screen.
Table 23 NETWORK > LAN
LABEL | DESCRIPTION |
LAN TCP/IP |
|
|
|
IP Address | Type the IP address of your ZyWALL in dotted decimal notation. 192.168.1.1 is the |
| factory default. Alternatively, click the right mouse button to copy and/or paste the |
| IP address. |
|
|
IP Subnet Mask | The subnet mask specifies the network number portion of an IP address. Your |
| ZyWALL automatically calculates the subnet mask based on the IP address that |
| you assign. Unless you are implementing subnetting, use the subnet mask |
| computed by the ZyWALL. |
|
|
RIP Direction | RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to |
| exchange routing information with other routers. The RIP Direction field controls |
| the sending and receiving of RIP packets. Select the RIP direction from Both/In |
| Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast |
| its routing table periodically. When set to Both or In Only, it will incorporate the |
| RIP information that it receives; when set to None, it will not send any RIP packets |
| and will ignore any RIP packets received. Both is the default. |
| 151 |
ZyWALL 2WG User’s Guide | |
|
|