Chapter 10 Wireless LAN
Figure 128 NETWORK > WLAN
The following table describes the labels in this screen.
Table 50 NETWORK > WLAN
LABEL | DESCRIPTION |
WLAN TCP/IP |
|
|
|
IP Address | Type the IP address of your ZyWALL’s WLAN interface in dotted decimal notation. |
| Alternatively, click the right mouse button to copy and/or paste the IP address. |
| Note: Make sure the IP addresses of the LAN, WAN, WLAN and |
| DMZ are on separate subnets. |
|
|
IP Subnet Mask | The subnet mask specifies the network number portion of an IP address. Your |
| ZyWALL automatically calculates the subnet mask based on the IP address that |
| you assign. Unless you are implementing subnetting, use the subnet mask |
| computed by the ZyWALL. |
|
|
RIP Direction | RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to |
| exchange routing information with other routers. The RIP Direction field controls |
| the sending and receiving of RIP packets. Select the RIP direction from Both/In |
| Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast |
| its routing table periodically. When set to Both or In Only, it will incorporate the |
| RIP information that it receives; when set to None, it will not send any RIP packets |
| and will ignore any RIP packets received. Both is the default. |
| 213 |
ZyWALL 2WG User’s Guide | |
|
|