Chapter 40 Filter Configuration
40.2 Configuring a Filter Set
The ZyWALL includes filtering for NetBIOS over TCP/IP packets by default. To configure another filter set, follow the procedure below.
1Enter 21 in the main menu to open menu 21.
Figure 405 Menu 21: Filter and Firewall Setup
Menu 21 - Filter and Firewall Setup
1.Filter Setup
2.Firewall Setup
Enter Menu Selection Number:
2Enter 1 to bring up the following menu.
Figure 406 Menu 21.1: Filter Set Configuration
| Menu 21.1 - Filter Set Configuration | ||
Filter | Comments | Filter | Comments |
Set # | Set # | ||
1 | _______________ | 7 | _______________ |
2 | _______________ | 8 | _______________ |
3 | _______________ | 9 | _______________ |
4 | _______________ | 10 | _______________ |
5 | _______________ | 11 | _______________ |
6 | _______________ | 12 | _______________ |
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
3Select the filter set you wish to configure
4Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.x - Filter Rules Summary.
This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in the previous menus.
620 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|