Chapter 36 Remote Node Setup

Figure 370 Menu 11.1: Remote Node Profile for PPTP Encapsulation

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

 

Encapsulation= PPTP

Edit IP= No

Service Type= Standard

Telco Option:

Outgoing:

Allocated Budget(min)= 0

Period(hr)= 0

My Login=

Schedules=

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

Session Options:

PPTP:

My IP Addr= 10.0.0.140

Edit Filter Sets= No

My IP Mask= 255.255.255.0

Idle Timeout(sec)= 100

Server IP Addr= 10.0.0.138

 

Connection ID/Name=

 

Press ENTER to Confirm or ESC to Cancel:

The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 221 Menu 11.1: Remote Node Profile for PPTP Encapsulation

FIELD

DESCRIPTION

Encapsulation

Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu

 

11.3 to check the IP Address setting once you have selected the encapsulation

 

method.

 

 

My IP Addr

Enter the IP address of the WAN Ethernet port.

 

 

My IP Mask

Enter the subnet mask of the WAN Ethernet port.

 

 

Server IP Addr

Enter the IP address of the ANT modem.

 

 

Connection ID/

Enter the connection ID or connection name in the ANT. It must follow the “c:id” and

Name

“n:name” format.

 

This field is optional and depends on the requirements of your DSL modem.

 

 

Schedules

You can apply up to four schedule sets here. For more details refer to Chapter 47

 

on page 681.

 

 

Nailed-Up

Press [SPACE BAR] and then [ENTER] to select Yes if you want to make the

Connections

connection to this remote node a nailed-up connection.

 

 

36.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.1.2 - Remote Node Network Layer Options. Not all fields are available on all models.

 

587

ZyWALL 2WG User’s Guide