Chapter 28 Introducing the SMT

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 193 Main Menu Commands

OPERATION

KEYSTROKES

DESCRIPTION

Move down

[ENTER]

To move forward to a submenu, type in the number of the desired

to another

 

submenu and press [ENTER].

menu

 

 

 

 

 

Move up to a

[ESC]

Press the [ESC] key to move back to the previous menu.

previous

 

 

menu

 

 

 

 

 

Move to a

Press [SPACE

Fields beginning with “Edit” lead to hidden menus and have a

“hidden”

BAR] to change

default setting of No. Press [SPACE BAR] to change No to Yes,

menu

No to Yes then

and then press [ENTER] to go to a “hidden” menu.

 

press [ENTER].

 

 

 

 

Move the

[ENTER] or [UP]/

Within a menu, press [ENTER] to move to the next field. You can

cursor

[DOWN] arrow

also use the [UP]/[DOWN] arrow keys to move to the previous and

 

keys

the next field, respectively.

 

 

When you are at the top of a menu, press the [UP] arrow key to

 

 

move to the bottom of a menu.

 

 

 

Entering

Fill in, or press

You need to fill in two types of fields. The first requires you to type

information

[SPACE BAR],

in the appropriate information. The second allows you to cycle

 

then press

through the available choices by pressing [SPACE BAR].

 

[ENTER] to select

 

 

from choices.

 

 

 

 

Required

<? >

All fields with the symbol <?> must be filled in order be able to

fields

 

save the new configuration.

 

 

 

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol

 

 

refers to an option that is Not Applicable.

 

 

 

Save your

[ENTER]

Save your configuration by pressing [ENTER] at the message

configuration

 

“Press ENTER to confirm or ESC to cancel”. Saving the data on

 

 

the screen will take you, in most cases to the previous menu.

 

 

Make sure you save your settings in each screen that you

 

 

configure.

 

 

 

Exit the SMT

Type 99, then

Type 99 at the main menu prompt and press [ENTER] to exit the

 

press [ENTER].

SMT interface.

 

 

 

28.3.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.

 

533

ZyWALL 2WG User’s Guide