|
| Chapter 3 Wizard Setup |
| Table 17 VPN Wizard: Network Setting | |
| LABEL | DESCRIPTION |
| Starting IP | When the Local Network field is configured to Single, enter a (static) IP address on |
| Address | the LAN behind your ZyWALL. When the Local Network field is configured to Range |
|
| IP, enter the beginning (static) IP address, in a range of computers on the LAN behind |
|
| your ZyWALL. When the Local Network field is configured to Subnet, this is a |
|
| (static) IP address on the LAN behind your ZyWALL. |
|
|
|
| Ending IP | When the Local Network field is configured to Single, this field is N/A. When the |
| Address/ | Local Network field is configured to Range IP, enter the end (static) IP address, in a |
| Subnet Mask | range of computers on the LAN behind your ZyWALL. When the Local Network field |
|
| is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL. |
|
|
|
| Remote | Remote IP addresses must be static and correspond to the remote IPSec router's |
| Network | configured local IP addresses. |
|
| Select Single for a single IP address. Select Range IP for a specific range of IP |
|
| addresses. Select Subnet to specify IP addresses on a network by their subnet |
|
| mask. |
|
|
|
| Starting IP | When the Remote Network field is configured to Single, enter a (static) IP address |
| Address | on the network behind the remote IPSec router. When the Remote Network field is |
|
| configured to Range IP, enter the beginning (static) IP address, in a range of |
|
| computers on the network behind the remote IPSec router. When the Remote |
|
| Network field is configured to Subnet, enter a (static) IP address on the network |
|
| behind the remote IPSec router |
|
|
|
| Ending IP | When the Remote Network field is configured to Single, this field is N/A. When the |
| Address/ | Remote Network field is configured to Range IP, enter the end (static) IP address, in |
| Subnet Mask | a range of computers on the network behind the remote IPSec router. When the |
|
| Remote Network field is configured to Subnet, enter a subnet mask on the network |
|
| behind the remote IPSec router. |
|
|
|
| Back | Click Back to return to the previous screen. |
|
|
|
| Next | Click Next to continue. |
|
|
|
3.5 VPN Wizard IKE Tunnel Setting (IKE Phase 1)
Use this screen to specify the authentication, encryption and other settings needed to negotiate a phase 1 IKE SA.
| 93 |
ZyWALL 2WG User’s Guide | |
|
|