ZyXEL Communications 2WG 29.1 Introduction to General Setup, 29.2 Configuring General Setup

SMT Menu 1 - General Setup

Menu 1 - General Setup contains administrative and system-related information.

Menu 1 - General Setup contains administrative and system-related information.

1Enter 1 in the main menu to open Menu 1 - General Setup.

2The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.

Figure 333 Menu 1: General Setup (Router Mode)

Menu 1 - General Setup

System Name=

Domain Name=

Device Mode= Router Mode

Edit Dynamic DNS= No

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 196 Menu 1: General Setup (Router Mode)

FIELD	DESCRIPTION
System Name	Choose a descriptive name for identification purposes. It is recommended you enter
	your computer’s “Computer name” in this field. This name can be up to 30
	alphanumeric characters long. Spaces are not allowed, but dashes “-” and
	underscores "_" are accepted.

Domain Name	Enter the domain name (if you know it) here. If you leave this field blank, the ISP
	may assign a domain name via DHCP. You can go to menu 24.8 and type "sys
	domain name" to see the current domain name used by your router.
	The domain name entered by you is given priority over the ISP assigned domain
	name. If you want to clear this field just press [SPACE BAR] and then [ENTER].