Chapter 42 System Information & Diagnosis
Figure 424 Examples of Error and Information Messages
52 | Thu Jul | 1 | 05:54:53 | 2004 | PP05 | ERROR | Wireless LAN init fail, code=15 |
53 | Thu Jul | 1 | 05:54:53 | 2004 | PINI | INFO | Channel 0 ok |
54 | Thu Jul | 1 | 05:54:56 2004 PP05 | SNMP TRAP 3: interface 3: link up | |||
55 | Thu Jul | 1 | 05:54:56 | 2004 | PP0d | INFO | LAN promiscuous mode <0> |
57 | Thu Jul | 1 | 05:54:56 | 2004 | PP0d | INFO | LAN promiscuous mode <1> |
58 | Thu Jul | 1 | 05:54:56 | 2004 | PINI | INFO | Last errorlog repeat 1 Times |
59 | Thu Jul | 1 | 05:54:56 | 2004 | PINI | INFO | main: init completed |
60 | Thu Jul | 1 | 05:55:26 | 2004 | PSSV | SNMP TRAP 0: cold start | |
61 | Thu Jul | 1 | 05:56:56 | 2004 | PINI | INFO | SMT Session Begin |
62 | Thu Jul | 1 | 07:50:58 | 2004 | PINI | INFO | SMT Session End |
63 | Thu Jul | 1 | 07:53:28 | 2004 | PINI | INFO | SMT Session Begin |
Clear Error | Log (y/n): |
|
|
|
| ||
The ZyWALL uses the syslog facility to log the CDR (Call Detail Record) and system messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Syslog Logging, as shown next.
Figure 425 Menu 24.3.2: System Maintenance: Syslog Logging
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
You need to configure the syslog parameters described in the following table to activate syslog then choose what you want to log.
Table 238 System Maintenance Menu Syslog Parameters
FIELD | DESCRIPTION |
Syslog: |
|
|
|
Active | Press [SPACE BAR] and then [ENTER] to turn syslog on or off. |
|
|
Syslog Server IP | Enter the server name or IP address of the syslog server that will log the selected |
Address | categories of logs. |
|
|
Log Facility | Press [SPACE BAR] and then [ENTER] to select a location. The log facility allows |
| you to log the messages to different files in the syslog server. Refer to the |
| documentation of your syslog program for more details. |
|
|
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your ZyWALL sends five types of syslog messages. Some examples (not all ZyWALL specific) of these syslog messages with their message formats are shown next:
640 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|