Chapter 26 Logs Screens
Table 171 3G Logs (continued)
LOG MESSAGE | DESCRIPTION | |
Budget counters are reset, | The ZyWALL restarted budget calculation from 0 after resetting | |
budget control is resumed. | the existing statistics. | |
Budget control is resumed. | The ZyWALL kept the existing budget control statistics and | |
| continue a counting. | |
Budget control is disabled. | Budget control is deactivated for the user account of the | |
| installed 3G card on the ZyWALL. | |
Skip 3G SIM authentication | The ZyWALL skiped SIM card authentication because the PIN | |
because 3G configuration is | code is not specified or SIM card authentication is disabled. | |
not set. |
| |
3G SIM authentication | SIM card authentication failed because the ZyWALL received a | |
failed because of no | SIM busy message three times when querying for the card | |
response from SIM card. | status. | |
3G card has no response, | The card was reset due to no response from the card for a | |
card is restarted. | period of time. | |
3G SIM card PIN code is | The specified PIN code does not match the inserted GSM 3G | |
incorrect. | card. | |
The 3G card is not | The user account of the 3G card is not activated. | |
activated. |
| |
3G Modem is locked. | The internal modem on the inserted 3G card is blocked. | |
SIM card not inserted or | There is no SIM card in the inserted GSM 3G card or the SIM | |
damaged. | card is damaged. | |
3G connection has been | The 3G connection has been dropped due to the specific | |
dropped - %s. | reason, such as idle timeout, manual disconnection, failure to | |
| get an IP address, switching to WAN 1, ping check failure, | |
| connection reset, and so on. | |
|
| |
3G signal strength is | The ZyWALL updated the 3G network signal strength | |
refreshed (%d dBm). | indication. | |
Warning: (%IMSI% or %ESN%) | This shows that the preconfigured time budget was exceeded. | |
Over time budget! (budget = | This also displays the IMSI of the SIM card in an inserted GSM | |
%CONFIGURED_BUDGET% hours, | 3G card or the ESN of the inserted CDMA 3G card and the 3G | |
used = %USED_VOLUME%(2 | connection’s usage time in hours. | |
decimals) hours). |
| |
Warning: (%IMSI% or %ESN%) | This shows that the specified percentage of the time budget | |
Over %THRESHOLD%% of time | was exceeded. This also displays the IMSI of the SIM card in | |
budget (%REMAIN_BUDGET%(2 | an inserted GSM 3G card or the ESN of the inserted CDMA 3G | |
decimals) hours remain in | card and the amount of time (in hours) the 3G connection can | |
still be used. | ||
%CONFIGURED_BUDGET% hours | ||
| ||
budget). |
|
| 497 |
ZyWALL 2WG User’s Guide | |
|
|