ZyXEL Communications 2WG 22.8 Configuring SSH

Chapter 22 Remote Management

Click ADVANCED > REMOTE MGMT > SSH to change your ZyWALL’s Secure Shell settings.

"It is recommended that you disable Telnet and FTP when you configure SSH for secure connections.

Figure 282 ADVANCED > REMOTE MGMT > SSH

The following table describes the labels in this screen.

Table 144 ADVANCED > REMOTE MGMT > SSH

LABEL	DESCRIPTION
Server Host Key	Select the certificate whose corresponding private key is to be used to identify the
	ZyWALL for SSH connections. You must have certificates already configured in the
	My Certificates screen (Click My Certificates and see Chapter 15 on page 349 for
	details).

Server Port	You may change the server port number for a service if needed, however you must
	use the same port number in order to use that service for remote management.

Server Access	Select the interface(s) through which a computer may access the ZyWALL using
	this service.

Secure Client IP	A secure client is a “trusted” computer that is allowed to communicate with the
Address	ZyWALL using this service.
	Select All to allow any computer to access the ZyWALL using this service.
	Choose Selected to just allow the computer with the IP address that you specify to
	access the ZyWALL using this service.

Apply	Click Apply to save your customized settings and exit this screen.

Reset	Click Reset to begin configuring this screen afresh.