Chapter 43 Firmware and Configuration File Maintenance
Figure 431 System Maintenance: Backup Configuration
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
2The following screen indicates that the Xmodem download has started.
Figure 432 System Maintenance: Starting Xmodem Download Screen
You can enter
Starting XMODEM download...
3Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen.
Figure 433 Backup Configuration Example
Type a location for storing the configuration file or click Browse to look for one. Choose the Xmodem protocol.
Then click Receive.
4After a successful backup you will see the following screen. Press any key to return to the SMT menu.
Figure 434 Successful Backup Confirmation Screen
**Backup Configuration completed. OK.
### Hit any key to continue.###
43.4Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the current configuration before restoring a previous back up configuration; please do not attempt to restore unless you have a backup configuration file stored on disk.
652 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|