Chapter 22 Remote Management
Figure 286 Secure FTP: Firmware Upload Example
$ sftp
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password: sftp> put firmware.bin ras Uploading firmware.bin to /ras
Read from remote host 192.168.1.1: Connection reset by peer Connection closed
$
22.11 Telnet
You can use Telnet to access the ZyWALL’s SMT or command line interface. Specify which interfaces allow Telnet access and from which IP address the access can come.
22.12 Configuring TELNET
Click ADVANCED > REMOTE MGMT > TELNET to open the following screen. Use this screen to specify which interfaces allow Telnet access and from which IP address the access can come.
"It is recommended that you disable Telnet and FTP when you configure SSH for secure connections.
Figure 287 ADVANCED > REMOTE MGMT > Telnet
452 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|