Chapter 27 Maintenance

The following table describes the labels in this screen.

Table 190 MAINTENANCE > Firmware Upload

LABEL

DESCRIPTION

File Path

Type in the location of the file you want to upload in this field or click Browse ... to find it.

 

 

Browse...

Click Browse... to find the .bin file you want to upload. Remember that you must

 

decompress compressed (.zip) files before you can upload them.

 

 

Upload

Click Upload to begin the upload process. This process may take up to two minutes.

 

 

Do not turn off the ZyWALL while firmware upload is in progress!

After you see the Firmware Upload in Process screen, wait two minutes before logging into the ZyWALL again.

Figure 318 Firmware Upload In Process

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 319 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the HOME screen.

If the upload was not successful, the following screen will appear. Click Return to go back to the F/W Upload screen.

522

 

ZyWALL 2WG User’s Guide