Chapter 26 Logs Screens
Table 164 System Error Logs
LOG MESSAGE | DESCRIPTION |
%s exceeds the max. | This attempt to create a NAT session exceeds the maximum |
number of session per | number of NAT session table entries allowed to be created per |
host! | host. |
setNetBIOSFilter: calloc | The router failed to allocate memory for the NetBIOS filter |
error | settings. |
readNetBIOSFilter: calloc | The router failed to allocate memory for the NetBIOS filter |
error | settings. |
WAN connection is down. | A WAN connection is down. You cannot access the network |
| through this interface. |
Dial Backup starts | Dial backup started working. |
Dial Backup ends | Dial backup stopped working. |
DHCP Server cannot assign | The LAN subnet, LAN alias 1, or LAN alias 2 was changed and |
the static IP %S (out of | the specified static DHCP IP addresses are no longer valid. |
range). |
|
The DHCP static IP %s is | The static DHCP IP address conflicts with another host. |
conflict. |
|
SMTP fail (%s) | The device failed to send an |
SMTP authentication fail | The device failed to authenticate with the SMTP server (error |
(%s) | message included). |
Table 165 Access Control Logs
LOG MESSAGE | DESCRIPTION |
Firewall default policy: [ TCP | Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access |
UDP IGMP ESP GRE OSPF ] | matched the default policy and was blocked or forwarded |
<Packet Direction> | according to the default policy’s setting. |
Firewall rule [NOT] match:[ TCP | Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access |
UDP IGMP ESP GRE OSPF | matched (or did not match) a configured firewall rule |
] <Packet Direction>, <rule:%d> | (denoted by its number) and was blocked or forwarded |
| according to the rule. |
Triangle route packet forwarded: | The firewall allowed a triangle route session to pass |
[ TCP UDP IGMP ESP GRE | through. |
OSPF ] |
|
Packet without a NAT table entry | The router blocked a packet that didn't have a |
blocked: [ TCP UDP IGMP | corresponding NAT table entry. |
ESP GRE OSPF ] |
|
Router sent blocked web site | The router sent a message to notify a user that the router |
message: TCP | blocked access to a web site that the user requested. |
Exceed maximum sessions per host | The device blocked a session because the host's |
(%d). | connections exceeded the maximum sessions per host. |
Firewall allowed a packet that | A packet from the WAN (TCP or UDP) matched a cone |
matched a NAT session: [ TCP | NAT session and the device forwarded it to the LAN. |
UDP ] |
|
494 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|