Chapter 19 Policy Route
Figure 256 Edit IP Policy Route
The following table describes the labels in this screen.
Table 124 ADVANCED > POLICY ROUTE > Edit
LABEL | DESCRIPTION |
Criteria |
|
|
|
Active | Select the check box to activate the policy. |
|
|
Rule Index | This is the index number of the policy route. |
|
|
IP Protocol | Select Predefined and then the IP protocol from ALL(0), ICMP(1), IGMP(2), |
| TCP(6), UDP(17), GRE(47), ESP(50) or AH(51). |
| Otherwise, select Custom and enter a number from 0 to 255. |
|
|
Type of Service | Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max |
| Thruput, Max Reliable or Mix Cost. |
|
|
Precedence | Precedence value of the incoming packet. Select a value from 0 to 7 or Any. |
|
|
Packet Length | Type a length of packet (in bytes). The operators in the Len Compare field apply |
| to incoming packets of this length. |
|
|
408 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|