Chapter 46 IP Policy Routing
Figure 459 Example of IP Policy Routing
To force Web packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.
1Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.
Figure 460 IP Routing Policy Example 1
Menu 25.1 - IP Routing Policy Setup |
| |
Rule Index= 1 |
| Active= Yes |
Criteria: | = 6 |
|
IP Protocol | Packet length= 10 | |
Type of Service= Don't Care | ||
Precedence | = Don't Care | Len Comp= Equal |
Source: |
| end= 192.168.1.64 |
addr start= 192.168.1.33 | ||
port start= 0 |
| end= N/A |
Destination: |
| end= N/A |
addr start= 0.0.0.0 | ||
port start= 80 | end= 80 | |
Action= Matched |
|
|
Gateway Type= IP Address | Redirect packet= N/A | |
Gateway addr | = 192.168.1.1 | |
Type of Service= Max Thruput | Log= No | |
Precedence | = 0 |
|
Edit policy to packets received from= No
Press ENTER to Confirm or ESC to Cancel:
678 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|