Chapter 38 Network Address Translation (NAT)
3Enter 1 or 2 to go to Menu 15.2.x - NAT Server Setup and configure the address mapping rules for the WAN 1 or WAN 2 interface on a ZyWALL with multiple WAN interfaces.
Figure 384 Menu 15.2.x: NAT Server Sets
| Menu 15.2.1 - | NAT Server Setup | |
Default Server: | 0.0.0.0 | IP Address | |
Rule Act. | Start Port | End Port | |
001 | No | 0 | 0 | 0.0.0.0 |
002 | No | 0 | 0 | 0.0.0.0 |
003 | No | 0 | 0 | 0.0.0.0 |
004 | No | 0 | 0 | 0.0.0.0 |
005 | No | 0 | 0 | 0.0.0.0 |
006 | No | 0 | 0 | 0.0.0.0 |
007 | No | 0 | 0 | 0.0.0.0 |
008 | No | 0 | 0 | 0.0.0.0 |
009 | No | 0 | 0 | 0.0.0.0 |
010 | No | 0 | 0 | 0.0.0.0 |
Select Command= None |
| Select Rule= N/A | ||
| Press ENTER to Confirm or ESC to Cancel: | |||
4Select Edit Rule in the Select Command field; type the index number of the NAT server you want to configure in the Select Rule field and press [ENTER] to open Menu 15.2.x.x - NAT Server Configuration (see the next figure).
Figure 385 15.2.x.x: NAT Server Configuration
15.2.1.2 - NAT Server Configuration |
|
Wan= 1 | Index= 2 |
Name= | 1 |
|
Active= Yes |
| |
Start | port= 21 | End port= 25 |
IP Address= 192.168.1.33
Press ENTER to Confirm or ESC to Cancel:
| 603 |
ZyWALL 2WG User’s Guide | |
|
|