Chapter 3 Wizard Setup
The following table describes the labels in this screen.
Table 13 ISP Parameters: PPPoE Encapsulation
LABEL | DESCRIPTION |
ISP Parameter |
|
for Internet |
|
Access |
|
|
|
Encapsulation | Choose an encapsulation method from the |
| forms a |
|
|
Service Name | Type the name of your service provider. |
|
|
User Name | Type the user name given to you by your ISP. |
|
|
Password | Type the password associated with the user name above. |
|
|
Retype to | Type your password again for confirmation. |
Confirm |
|
|
|
Select | |
|
|
Idle Timeout | Type the time in seconds that elapses before the router automatically disconnects |
| from the PPPoE server. The default time is 100 seconds. |
|
|
WAN IP Address |
|
Assignment |
|
|
|
IP Address | Select Dynamic If your ISP did not assign you a fixed IP address. This is the |
Assignment | default selection. |
| Select Static If the ISP assigned a fixed IP address. |
| The fields below are available only when you select Static. |
|
|
My WAN IP | Enter your WAN IP address in this field. |
Address |
|
|
|
First DNS Server | Enter the DNS server's IP address(es) in the field(s) to the right. |
Second DNS | Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not |
Server | configure a DNS server, you must know the IP address of a machine in order to |
| access it. |
|
|
Back | Click Back to return to the previous wizard screen. |
|
|
Apply | Click Apply to save your changes and go to the next screen. |
|
|
3.2.1.3 PPTP Encapsulation
PPTP supports
"The ZyWALL supports one PPTP server connection at any given time.
84 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|