ZyXEL Communications 2WG 28.3 Navigating the SMT Interface, 28.2.2 Entering the Password

Chapter 28 Introducing the SMT

Figure 328 Initial Screen

Copyright (c) 1994 - 2007 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:00:AA:77:90:79 initialize ch =1, ethernet address: 00:00:AA:77:90:7A initialize ch =2, ethernet address: 00:00:AA:77:90:7B initialize ch =3, ethernet address: 00:00:AA:77:90:79 initialize ch =4, ethernet address: 00:00:AA:77:90:7C initialize ch =5, ethernet address: 06:00:AA:77:90:79 initialize ch =6, ethernet address: 0A:00:AA:77:90:79 initialize ch =7, ethernet address: 0E:00:AA:77:90:79 initialize ch =8, ethernet address: 12:00:AA:77:90:79 initialize ch =9, ethernet address: 16:00:AA:77:90:79 initialize ch =10, ethernet address: 1A:00:AA:77:90:79 initialize ch =11, ethernet address: 1E:00:AA:77:90:79 AUX port init .. done

Modem 1 init . inactive Modem 2 init . done

Press ENTER to continue...

28.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.

For your first login, enter the default password “1234”. As you type the password, the screen displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up the login screen again.

Figure 329 Password Screen

Enter Password : XXXX

28.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.

532
	ZyWALL 2WG User’s Guide