Chapter 33 DMZ Setup

"DMZ, WLAN and LAN IP addresses must be on separate subnets. You must also configure NAT for the DMZ port (see Chapter 38 on page 595) in menus 15.1 and 15.2.

33.3.2IP Alias Setup

Use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias field, press [SPACE BAR] to choose Yes and press [ENTER] to open Menu 5.2.1 - IP Alias Setup, as shown next. Use this menu to configure the second and third networks.

Figure 359 Menu 5.2.1: IP Alias Setup

Menu 5.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Refer to Table 212 on page 563 for instructions on configuring IP alias parameters.

 

573

ZyWALL 2WG User’s Guide