Chapter 19 Policy Route

Table 124 ADVANCED > POLICY ROUTE > Edit (continued)

LABEL

DESCRIPTION

Gateway

Select User-Definedand enter the IP address of the gateway if you want to

 

specify the IP address of the gateway. The gateway is an immediate neighbor of

 

your ZyWALL that will forward the packet to the destination. The gateway must be

 

a router on the same segment as your ZyWALL's LAN or WAN interface.

 

Select WAN Interface to have the ZyWALL send traffic that matches the policy

 

route through a specific WAN interface. Select the WAN interface from the drop-

 

down list box.

 

Select the Use another interface when the specified WAN interface is not

 

available. check box to have the ZyWALL send traffic that matches the policy

 

route through the other WAN interface if it cannot send the traffic through the WAN

 

interface you selected. This option is only available when you select WAN

 

Interface.

Converted Type

Set the new TOS value of the outgoing packet. Prioritize incoming network traffic

of Service

by choosing Don’t Change, Normal, Min Delay, Max Thruput, Max Reliable or

 

Min Cost.

Converted

Set the new outgoing packet precedence value. Values are 0 to 7 or Don’t

Precedence

Change.

 

 

Log

Select Yes from the drop-down list box to make an entry in the system log when a

 

policy is executed.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

410

 

ZyWALL 2WG User’s Guide