|
| Chapter 38 Network Address Translation (NAT) |
| Table 226 Fields in Menu 15.1.1 (continued) | |
| FIELD | DESCRIPTION |
| Action | The default is Edit. Edit means you want to edit a selected rule (see following field). Insert |
|
| Before means to insert a rule before the rule selected. The rules after the selected rule will |
|
| then be moved down by one rule. Delete means to delete the selected rule and then all |
|
| the rules after the selected one will be advanced one rule. None disables the Select Rule |
|
| item. |
|
|
|
| Select | When you choose Edit, Insert Before or Delete in the previous field the cursor jumps to |
| Rule | this field to allow you to select the rule to apply the action in question. |
|
|
|
"You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule. No changes to the set take place until this action is taken.
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs.
"An IP End address must be numerically greater than its corresponding IP Start address.
Figure 382 Menu 15.1.1.1: Editing/Configuring an Individual Rule in a Set
Menu 15.1.1.1 Address Mapping Rule
Type=
Local IP:
Start=
End = N/A
Global IP:
Start=
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
| 601 |
ZyWALL 2WG User’s Guide | |
|
|