Chapter 30 WAN and Dial Backup Setup

Figure 339 Menu 2: Dial Backup Setup

Menu 2 - WAN Setup

WAN 1 MAC Address:

Assigned By= Factory default

IP Address= N/A

Dial-Backup:

Active= No

Port Speed= 115200

AT Command String:

Init= at&fs0=0

Edit Advanced Setup= No

3G Modem Setup: Init= Configure APN APN = internet

PIN code= 0000

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 202 Menu 2: Dial Backup Setup

FIELD

DESCRIPTION

Dial-Backup:

 

 

 

Active

Use this field to turn the dial-backup feature on (Yes) or off (No).

 

 

Port Speed

Press [SPACE BAR] and then press [ENTER] to select the speed of the connection

 

between the Dial Backup port and the external device.

 

Available speeds are:

 

9600, 19200, 38400, 57600, 115200 or 230400 bps.

 

 

AT Command

 

String:

 

 

 

Init

Enter the AT command string to initialize the WAN device. Consult the manual of your

 

WAN device connected to your Dial Backup port for specific AT commands.

 

 

Edit Advanced

To edit the advanced setup for the Dial Backup port, move the cursor to this field;

Setup

press the [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 2.1 -

 

Advanced Setup.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

30.3.2Advanced WAN Setup

"Consult the manual of your WAN device connected to your Dial Backup port for specific AT commands.

 

547

ZyWALL 2WG User’s Guide