Chapter 29 SMT Menu 1 - General Setup
Table 196 Menu 1: General Setup (Router Mode) (continued)
FIELD | DESCRIPTION |
Device Mode | Press [SPACE BAR] and then [ENTER] to select Router Mode. |
|
|
Edit Dynamic | Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes to |
DNS | configure Menu 1.1 - Configure Dynamic DNS discussed next. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Figure 334 Menu 1: General Setup (Bridge Mode)
Menu 1 - General Setup
System Name=
Domain Name=
Device Mode= Bridge Mode
IP Address= 0.0.0.0
Network Mask= 0.0.0.0
Gateway= 0.0.0.0
First System DNS Server
IP Address= 0.0.0.0
Second System DNS Server
IP Address= 0.0.0.0
Third System DNS Server
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields not previously discussed (see Table 196 on page 539).
Table 197 Menu 1: General Setup (Bridge Mode)
FIELD | DESCRIPTION |
Device Mode | Press [SPACE BAR] and then [ENTER] to select Bridge Mode. |
|
|
IP Address | Enter the IP address of your ZyWALL in dotted decimal notation. |
|
|
Network Mask | Enter the subnet mask of your ZyWALL. |
|
|
Gateway | Enter the gateway IP address. |
|
|
First System | Enter the DNS server's IP address(es) in the IP Address field(s) if you have the IP |
DNS Server | address(es) of the DNS server(s). |
Second System |
|
DNS Server |
|
Third System |
|
DNS Server |
|
|
|
540 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|