Chapter 10 Wireless LAN
Figure 134 WIRELESS >
The following table describes the labels in this screen.
Table 55 WIRELESS >
LABEL | DESCRIPTION |
Enable | The wireless LAN through a wireless LAN card is turned off by default, before you |
Wireless Card | enable the wireless LAN you should configure some security by setting MAC filters |
| and/or 802.1x security; otherwise your wireless LAN will be vulnerable upon enabling |
| it. Select the check box to enable the wireless LAN. |
|
|
Bridge to | Select LAN to use the wireless card as part of the LAN. |
| Select DMZ to use the wireless card as part of the DMZ. |
| Select WLAN to use the wireless card as part of the WLAN. |
| The ZyWALL restarts after you change the wireless card setting. |
| Note: If you set the wireless card to be part of the LAN or DMZ, you |
| can still use wireless access. The firewall will treat the wireless |
| card as part of the LAN or DMZ respectively. |
|
|
224 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|