Chapter 36 Remote Node Setup

 

Table 219 Menu 11.1: Remote Node Profile for Ethernet Encapsulation (continued)

 

FIELD

DESCRIPTION

 

Server

This field is valid only when RoadRunner is selected in the Service Type field. The

 

 

ZyWALL will find the RoadRunner Server IP automatically if this field is left blank. If

 

 

it does not, then you must enter the authentication server IP address here.

 

 

 

 

Relogin Every

This field is available when you select Telia Login in the Service Type field.

 

(min)

The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.

 

 

Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait

 

 

between logins.

 

 

 

 

Route

This field refers to the protocol that will be routed by your ZyWALL – IP is the only

 

 

option for the ZyWALL.

 

 

 

 

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press

 

 

[ENTER] to go to Menu 11.1.2 - Remote Node Network Layer Options.

 

Session Options

 

 

 

 

 

Schedules

You can apply up to four schedule sets here. For more details please refer to

 

 

Chapter 47 on page 681.

 

 

 

 

Edit Filter Sets

This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and

 

 

press [ENTER] to open menu 11.1.4 to edit the filter sets. See Section 36.5 on page

 

 

589 for more details.

 

 

 

 

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to

 

save your configuration, or press [ESC] at any time to cancel.

 

 

 

36.3.2 PPPoE Encapsulation

The ZyWALL supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use PPPoE encapsulation when you’re using the ZyWALL with a DSL modem as the WAN device. If you change the Encapsulation to PPPoE, then you will see the next screen.

Figure 369 Menu 11.1: Remote Node Profile for PPPoE Encapsulation

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

 

Encapsulation= PPPoE

Edit IP= No

Service Type= Standard

Telco Option:

Service Name=

Allocated Budget(min)= 0

Outgoing:

Period(hr)= 0

My Login=

Schedules=

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

Session Options:

Edit Filter Sets= No

Idle Timeout(sec)= 100

Press ENTER to Confirm or ESC to Cancel:

 

585

ZyWALL 2WG User’s Guide