Chapter 27 Maintenance
Figure 310 MAINTENANCE > Password
The following table describes the labels in this screen.
Table 185 MAINTENANCE > Password
LABEL | DESCRIPTION |
Old Password | Type the default password or the existing password you use to access the system |
| in this field. If you forget the password, you may have to use the hardware RESET |
| button. This restores the default password of 1234. |
|
|
New Password | Type your new system password (up to 30 characters). Note that as you type a |
| password, the screen displays a (*) for each character you type. |
|
|
Retype to Confirm | Type the new password again for confirmation. |
|
|
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
27.4 Time and Date
The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time manually or get the current time and date from an external server when you turn on your ZyWALL.
To change your ZyWALL’s time and date, click MAINTENANCE > Time and Date. The screen appears as shown. Use this screen to configure the ZyWALL’s time based on your local time zone.
| 513 |
ZyWALL 2WG User’s Guide | |
|
|