Chapter 1 Getting to Know Your ZyWALL
1.4.4 Front Panel LightsFigure 4 Front Panel
The following table describes the lights.
Table 1 Front Panel Lights
LED | COLOR | STATUS | DESCRIPTION | |
PWR |
| Off | The ZyWALL is turned off. | |
|
|
|
| |
| Green | On | The ZyWALL is ready and running. | |
|
|
|
| |
|
| Flashing | The ZyWALL is restarting. | |
|
|
|
| |
| Red | On | The power to the ZyWALL is too low. | |
|
|
|
| |
LAN/DMZ 10/ |
| Off | The LAN/DMZ is not connected. | |
100 |
|
|
| |
Green | On | The ZyWALL has a successful 10Mbps Ethernet connection. | ||
| ||||
|
|
|
| |
|
| Flashing | The 10M LAN is sending or receiving packets. | |
|
|
|
| |
| Orange | On | The ZyWALL has a successful 100Mbps Ethernet | |
|
|
| connection. | |
|
|
|
| |
|
| Flashing | The 100M LAN is sending or receiving packets. | |
|
|
|
| |
WAN |
| Off | The WAN connection is not ready, or has failed. | |
|
|
|
| |
| Green | On | The ZyWALL has a successful 10Mbps WAN connection. | |
|
|
|
| |
|
| Flashing | The 10M WAN is sending or receiving packets. | |
|
|
|
| |
| Orange | On | The ZyWALL has a successful 100Mbps WAN connection. | |
|
|
|
| |
|
| Flashing | The 100M WAN is sending or receiving packets. | |
|
|
|
| |
AUX | Green | Off | The backup port is not connected. | |
|
|
|
| |
|
| On | The backup port is connected. | |
|
|
|
| |
|
| Flashing | The backup port is sending or receiving packets. | |
|
|
|
| |
WLAN | Green | Off | The wireless LAN through the | |
|
|
| not ready, or has failed. | |
|
|
|
| |
|
| On | The wireless LAN through the | |
|
|
| ready. | |
|
|
|
| |
|
| Flashing | The wireless LAN through the | |
|
|
| sending or receiving packets. | |
|
|
|
| |
CARD |
| Off | There is no 3G card inserted in the ZyWALL. | |
|
|
|
| |
| Green | On | A 3G card is inserted and detected by the ZyWALL. | |
|
|
|
| |
| Orange | On | The 3G WAN connection is ready. | |
|
|
|
| |
|
| Flashing | The 3G WAN is sending or receiving packets. | |
|
|
|
|
56 |
| |
ZyWALL 2WG User’s Guide |
| |
|
|
|