SET ALERT
Use the SET ALERT command to enable or disable the notification of an alert statement (trap) from this Bridge Module to the designated trap receiver (SNMP workstation).
Format
SET ALERT {alert type} {setting}
Parameters
{alert type} = authentication change hello
{setting} = enable
disable (default for all alert types)
Example
The following is an example of disabling the Hello alert, normally generated when a new Bridge Module is installed in the concentrator or when an existing Bridge Module is reset.
OEBM> set alert hello enable | [ENTER] |
Alert HELLO set to ENABLE
Example
The following is an example of enabling the Change alert for any configuration change made to the Bridge Module.
OEBM> set alert change enable | [ENTER] |
Alert CHANGE set to ENABLE
Description
You can have the Bridge Module send an alert (trap) to the
